Disabling the Weazit Tag
The Weazit Tag can be disabled to stop it from sharing its location. Once disabled, it will no longer report to Google’s Find Hub network or Apple’s
Find My network, and the owner will no longer receive updates on its current location. It will also stop triggering unknown tracker alerts. If you receive a
notification on your Android or iOS device indicating that a Weazit Tag has been detected nearby and you are unfamiliar with
this device, you can make it ring through the system notification. After locating the device, follow the steps below to disable it.
Disable via Button Press:
- Locate the button on your Weazit Tag.
- Press and hold the button for about 5 seconds. You will hear three confirmation beeps
when succeed.
Disable via Battery Removal:
- Use your fingernail or a small tool to open the device from the gap on the side of the Weazit Tag.
- Carefully remove the battery.
- Close the Weazit Tag by aligning the top holes on both lids.
Disable via Battery Removal:
- Twist open the battery cover of the Weazit Tag.
- Carefully remove the battery.
- Close the Weazit Tag by twisting on the battery cover .
Re-enable the Weazit Tag:
To re-enable the Weazit Tag, either press the button or reinstall
the battery.
Press the Button:
Press the button for one second. When re – enabled, you will hear a confirmation beep.
Replace the
Battery:
If you removed the battery, place a new CR2032 coin battery inside with the
positive side up, and close the device.
Factory Reset and
Pairing:
To reset the Weazit Tag to factory settings, press the button
three times quickly and hold the forth time for one second. After you hear a long
beep, release the button. After resetting, you can pair the Weazit Tag with a new Google or Apple account.
Important Notes:
- When the Weazit Tag is paired with an Android device, it
operates as a Google Find Hub locator tag. If paired with an iOS device,
it functions as an Apple Find My locator tag. - For pairing, ensure Bluetooth is enabled on your device and that it has
internet access. To activate the Weazit Tag, press the
button once, and you will hear a melody confirming activation. - You can remove the Weazit Tag from either the Google Find Hub app on
Android or the Find My app on iOS. If it’s within Bluetooth range, a
factory reset will automatically occur upon removal from the app. If out
of range, perform a manual factory reset.